 |
Disclaimer/Terms of Use
First-Time Users Must Read And Acknowledge
The wind resource estimates on this website were developed using MesoMap, a mesoscale atmospheric simulation system developed by TrueWind Solutions, at a spatial grid resolution of 400 meters (1312 ft, or one-quarter mile), and validated by the National Renewable Energy Laboratory (NREL) and independent meteorologists using historical data. Wind speeds shown are estimated to be within about +/-7% accuracy, and wind power density values are estimated to be within about +/-15% accuracy.
Site feasibility studies should be conducted to confirm the map estimates, including direct measurement at turbine hub height according to wind energy industry standards. Weather deviations from long-term averages and local terrain effects may cause additional variations from the map estimates. Local site characteristics such as trees, buildings and other obstructions can significantly affect wind speed and turbine output estimates. Wind speeds can be reduced at up to four times the height of an obstruction and as far away as a mile or more. Small differences in wind speeds translate into large differences in turbine outputs.
Neither TrueWind Solutions nor any of the project sponsors (including NREL, BPA, Northwest SEED and NWCDC) make any guarantees or accept liability for the accuracy of the estimates presented here. Use of the maps and/or data for anything other than general information is solely at the risk of the user. TrueWind and project sponsors may not be held liable for any loss, damage or other consequence resulting form the use of the maps and/or data contained on these pages. Please see Adjustments for Local Conditions and Accuracy of Wind Map Estimates for more information.
By using this site, the viewer agrees that he or she has read the disclaimer statement above and agrees to assume all liability for using the data.
|
|
